msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2024-05-28 11:04+0800\n"
"PO-Revision-Date: 2024-05-28 11:10+0800\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 3.4.4\n"
"X-Poedit-Basepath: ../../../../../src/service/operate_server\n"
"X-Poedit-SourceCharset: UTF-8\n"
"X-Poedit-KeywordsList: I18N_C;I18N\n"
"X-Poedit-SearchPath-0: .\n"

#: OperateServerClass.cpp:627
msgid "遥控选择成功"
msgstr "Remote control selection success"

#: OperateServerClass.cpp:631
msgid "遥控选择失败"
msgstr "Remote control selection failed"

#: OperateServerClass.cpp:639 OptControl.cpp:2957
msgid "遥控取消成功"
msgstr "Remote control revoke success"

#: OperateServerClass.cpp:643 OptControl.cpp:2951
msgid "遥控取消失败"
msgstr "Remote control revoke failed"

#: OperateServerClass.cpp:652 OperateServerClass.cpp:753 OptControl.cpp:1384
#: OptControl.cpp:1538 OptControl.cpp:2319 OptControl.cpp:2527
#: OptControl.cpp:2711
msgid "遥控执行成功"
msgstr "Remote control execution success"

#: OperateServerClass.cpp:657
msgid "遥控执行失败"
msgstr "Remote control execution failed"

#: OperateServerClass.cpp:663
msgid "五防请求发送失败"
msgstr "Send five-prevention request failed"

#: OperateServerClass.cpp:670
msgid "五防闭锁"
msgstr "Five-prevention interlocks"

#: OperateServerClass.cpp:674
msgid "五防返校不匹配"
msgstr "Five-prevention acknowledgement is not matched"

#: OperateServerClass.cpp:691
msgid "取消置数成功"
msgstr "Cancel the manual setting successful"

#: OperateServerClass.cpp:696
msgid "人工置数成功"
msgstr "[Manual Setting]"

#: OperateServerClass.cpp:704
msgid "取消禁止刷新成功"
msgstr "Unban refresh successful"

#: OperateServerClass.cpp:709
msgid "设置禁止刷新成功"
msgstr "Prohibit to refresh successful"

#: OperateServerClass.cpp:717
msgid "取消禁止告警成功"
msgstr "Unban alarm successful"

#: OperateServerClass.cpp:722
msgid "设置禁止告警成功"
msgstr "Prohibit to alarm successful"

#: OperateServerClass.cpp:730
msgid "取消禁止控制成功"
msgstr "Unban control successful"

#: OperateServerClass.cpp:735
msgid "设置禁止控制成功"
msgstr "Prohibit to control successful"

#: OperateServerClass.cpp:741
msgid " 遥控选择指令发送失败"
msgstr "Send remote control selection instruction failed"

#: OperateServerClass.cpp:746
msgid "遥控取消指令发送失败"
msgstr "Send remote control revoke instruction failed"

#: OperateServerClass.cpp:758
msgid "遥控执行指令发送失败"
msgstr "Send remote control execution instruction failed"

#: OperateServerClass.cpp:766
msgid " 控制监护允许"
msgstr "Control monitoring permission"

#: OperateServerClass.cpp:770
msgid " 控制监护不允许"
msgstr "Control monitoring not permission"

#: OperateServerClass.cpp:778
msgid " 限值设置成功"
msgstr "Set limit value successful"

#: OperateServerClass.cpp:782
msgid " 限值设置失败"
msgstr "Set limit value failed"

#: OperateServerClass.cpp:788
msgid " 遥信对位"
msgstr "Teleindication para"

#: OperateServerClass.cpp:804
msgid " 五防校验超时"
msgstr "Five-prevention check timeout"

#: OperateServerClass.cpp:808
msgid " 遥控选择超时"
msgstr "Remote control selection timeout"

#: OperateServerClass.cpp:812
msgid " 遥控执行超时"
msgstr "Remote control execution timeout"

#: OperateServerClass.cpp:816
msgid " 遥控取消超时"
msgstr "Remote control revoke timeout"

#: OperateServerClass.cpp:841
msgid "未知模式号"
msgstr "Unknown mode number"

#: OperateServerClass.cpp:843 OperateServerClass.cpp:863
msgid "未知工艺名"
msgstr "Unknown craft name"

#: OptControl.cpp:100
msgid "当前设备已被控制保留！"
msgstr "The current device has been control retained！"

#: OptControl.cpp:186
msgid ""
"\n"
"设备标签格式错误！"
msgstr ""
"\n"
"Device label format error!"

#: OptControl.cpp:196
msgid ""
"\n"
"设备占用检查:"
msgstr ""
"\n"
"Equipment occupancy check:"

#: OptControl.cpp:206
msgid ""
"\n"
"控制权位置检查:"
msgstr ""
"\n"
"Control position check:"

#: OptControl.cpp:215
msgid ""
"\n"
"状态检查:"
msgstr ""
"\n"
"Status check:"

#: OptControl.cpp:224
msgid ""
"\n"
"屏蔽检查:"
msgstr ""
"\n"
"Shielding check:"

#: OptControl.cpp:233
msgid ""
"\n"
"挂牌检查:"
msgstr ""
"\n"
"Listing inspection:"

#: OptControl.cpp:244
msgid ""
"\n"
"闭锁检查:"
msgstr ""
"\n"
"Locking test:"

#: OptControl.cpp:265
msgid "控制目标值小于零非法！"
msgstr "Control target value less than zero illegal!"

#: OptControl.cpp:281
msgid "实时库中获取测点控制动作组参数异常！"
msgstr ""
"Abnormal parameters of the control action group of measurement points "
"obtained from the rdb!"

#: OptControl.cpp:288
msgid "控制目标值在控制动作组中未找到,请检查控制动作组配置！"
msgstr ""
"The control target value was not found in the control action group,please "
"check the configuration of control action group!"

#: OptControl.cpp:295
msgid "控制目标值在控制动作组中不唯一,请检查控制动作组配置！"
msgstr ""
"The control target value is not unique in the control action group,please "
"check the configuration of control action group!"

#: OptControl.cpp:302
msgid "控制动作组中[遥控分量数](<1 or >5)错误,请检查控制动作组配置！"
msgstr ""
"Control action group[Number of Remote Control Component](<1 or >5)error,"
"please check the configuration of control action group!"

#: OptControl.cpp:309
msgid "控制动作组中[遥控点索引](<1 or >5)错误,请检查控制动作组配置！"
msgstr ""
"Control action group[Index of Remote Control Point](<1 or >5)error,please "
"check the configuration of control action group!"

#: OptControl.cpp:316
msgid "控制动作组中[遥控点索引]>[遥控分量数]错误,请检查控制动作组配置！"
msgstr ""
"Control action group[Index of Remote Control Point]>[Number of Remote "
"Control Component]error,please check the configuration of control action "
"group!"

#: OptControl.cpp:337
msgid "JSON KeyIdTag 格式错误 !"
msgstr "JSON Tag format error!"

#: OptControl.cpp:350
msgid "获得测点基本参数信息错误 !"
msgstr "Error in obtaining basic parameter information of measuring point!"

#: OptControl.cpp:385
msgid "获取设备当前值与状态错误!"
msgstr "Error in obtaining current value and status of deviec!"

#: OptControl.cpp:454
msgid "获取数字量控制信息表失败，请重试 !"
msgstr "Failed to get digital control infomation table,please try again!"

#: OptControl.cpp:474
msgid "没有配置控制动作组，请检查配置 !"
msgstr "No control action group is configured,please check the configuration!"

#: OptControl.cpp:502
msgid "获取混合量控制信息表失败，请重试 !"
msgstr "Failed to get mix control infomation table,please try again!"

#: OptControl.cpp:551
msgid "获取模拟量控制信息表失败，请重试 !"
msgstr "Failed to get analog control infomation table,please try again!"

#: OptControl.cpp:668 OptControl.cpp:690
msgid "遥控请求失败:"
msgstr "Remote control request failed:"

#: OptControl.cpp:774
msgid "遥控请求失败！！！"
msgstr "Remote control request failed!!!"

#: OptControl.cpp:779
msgid "遥控请求成功！"
msgstr "Remote control request success!"

#: OptControl.cpp:833
msgid "控制类型为直接控制不需要遥控选择!"
msgstr "Control type is direct control, no remote control selection required!"

#: OptControl.cpp:845
msgid "设备操作正忙，请稍后重试 !"
msgstr "Equipment operation is busy,please try again later!"

#: OptControl.cpp:857
msgid "只有数字量和混合量支持遥控选择 !"
msgstr "Only digital and mixed support remote control selection!"

#: OptControl.cpp:870
msgid "关联前置遥控号为空，请检查配置!"
msgstr ""
"The associated prepositive remote control number is empty,please check the "
"configuration!"

#: OptControl.cpp:882
msgid "设备当前值不允许控制到目标值!"
msgstr ""
"The current value of the device is not allowed to control to the target "
"value!"

#: OptControl.cpp:902
msgid "当前值与目标值一致，遥控选择失败!"
msgstr ""
"The current value is consistent with the target value,remote control "
"selection failed!"

#: OptControl.cpp:1139 OptControl.cpp:1152
msgid "遥控选择失败:"
msgstr "Remote control selection failed:"

#: OptControl.cpp:1184
msgid "遥控选择失败：选择命令发送失败!"
msgstr "Remote control selection failed: send selection command failed!"

#: OptControl.cpp:1195
msgid "遥控选择失败：控制信息表中插入记录失败!"
msgstr ""
"Remote control selection failed: insert record to control infomation table "
"failed!"

#: OptControl.cpp:1377 OptControl.cpp:1531 OptControl.cpp:2520
msgid "遥控执行失败 \n"
msgstr "Remote control execution failed \n"

#: OptControl.cpp:1688
msgid "遥控选择失败 !\n"
msgstr "Remote control selection failed!\n"

#: OptControl.cpp:1695
msgid "遥控选择成功 !"
msgstr "Remote control selection success!"

#: OptControl.cpp:1770
msgid "遥控关闭失败:"
msgstr "Remote control close failed:"

#: OptControl.cpp:1837 OptControl.cpp:1847
msgid "命令执行失败:"
msgstr "Command execution failed:"

#: OptControl.cpp:1860
msgid "命令执行失败：命令发送失败！"
msgstr "Command execution failed: send command failed!"

#: OptControl.cpp:1879
msgid "命令执行失败：控制信息表中插入记录失败！"
msgstr ""
"Command execution failed: insert record to control infomation table failed!"

#: OptControl.cpp:2015
msgid "命令执行失败"
msgstr "Command execution failed"

#: OptControl.cpp:2021
msgid "命令执行成功"
msgstr "Command execution success"

#: OptControl.cpp:2199 OptControl.cpp:2212
msgid "控制执行失败:"
msgstr "Remote control execution failed:"

#: OptControl.cpp:2245
msgid "遥控执行失败：控制命令发送失败!"
msgstr "Remote control execution failed: send control command failed!"

#: OptControl.cpp:2258
msgid "遥控执行失败：控制信息表中插入记录错误!"
msgstr ""
"Remote control execution failed: insert record to control infomation table "
"failed!"

#: OptControl.cpp:2785 OptControl.cpp:2798
msgid "控制取消失败:"
msgstr "Remote control revoke failed:"

#: OptControl.cpp:2839
msgid "遥控取消指令发送失败！"
msgstr "Send remote control revoke instruction failed!"

#: OptControl.cpp:3099 OptControl.cpp:3429
msgid "遥控选择超时！"
msgstr "Remote control selection timeout!"

#: OptControl.cpp:3107 OptControl.cpp:3433
msgid "遥控执行超时！"
msgstr "Remote control execution timeout!"

#: OptControl.cpp:3113
msgid "遥控取消超时！"
msgstr "Remote control revoke timeout!"

#: OptControl.cpp:3119
msgid "命令执行超时！"
msgstr "Command execution timeout!"

#: OptControl.cpp:3261
msgid "遥控请求失败！"
msgstr "Remote control request failed!"

#: OptControl.cpp:3313 OptControl.cpp:3339
msgid "遥控选择失败！"
msgstr "Remote control selection failed! "

#: OptControl.cpp:3366 OptControl.cpp:3394
msgid "遥控执行失败！"
msgstr "Remote control execution failed!"

#: OptControl.cpp:3408
msgid "遥控执行成功！"
msgstr "Remote control execution success!"

#: OptControl.cpp:3707 OptControl.cpp:3731
msgid "控制点设置"
msgstr "Control point setting"

#: OptControl.cpp:3710 OptControl.cpp:3734
msgid "[人工置数]"
msgstr "[Manual Setting]"

#: OptControl.cpp:3714 OptControl.cpp:3738
msgid "[禁止刷新]"
msgstr "[Prohibit to refresh]"

#: OptControl.cpp:3718 OptControl.cpp:3742
msgid "[禁止控制]"
msgstr "[Prohibit to control]"

#: OptControl.cpp:3720 OptControl.cpp:3744 OptShieldSet.cpp:117 OptToken.cpp:56
msgid ",禁止控制！"
msgstr ",prohibit to control!"

#: OptHandover.cpp:322
msgid "获取测点权限移交组参数失败！"
msgstr ""
"Failed to get permission transfer group parameters of measurement point!"

#: OptHandover.cpp:338
msgid "获取设备控制权参数失败！"
msgstr "Failed to get the device control permission parameters!"

#: OptHandover.cpp:343
msgid "设备控制权不在本系统！"
msgstr "The device control permisson not in this system!"

#: OptHandover.cpp:451
msgid " 请求控制权限移交 等待接收"
msgstr "Request control permisson transfer. Waiting to receive"

#: OptHandover.cpp:456
msgid " 请求控制权限移交 超时"
msgstr "Request control permisson transfer. Timeout"

#: OptHandover.cpp:464
msgid " 接收控制权限 成功"
msgstr "Receive control permisson. Success"

#: OptHandover.cpp:470
msgid " 强制收回控制权限 成功"
msgstr "Enforce the recall of control permission. Success"

#: OptHandover.cpp:476
msgid " 控制权限移交 拒绝接收"
msgstr "Control permission transfer. Refuse to accept"

#: OptHandover.cpp:570
msgid "移交中"
msgstr "In the transfer"

#: OptHandover.cpp:575
msgid "移交超时"
msgstr "Transfer timeout"

#: OptHandover.cpp:584
msgid "移交成功"
msgstr "Transfer success"

#: OptHandover.cpp:591
msgid "拒绝接收"
msgstr "Refuse to accept"

#: OptShieldSet.cpp:100
msgid "设备设置"
msgstr "Device settings"

#: OptShieldSet.cpp:434
msgid "全站"
msgstr "Total station"

#: OptShieldSet.cpp:437
msgid "按责任区"
msgstr "According to the area"

#: OptShieldSet.cpp:440
msgid "按电压等级"
msgstr "According to the voltage grade"

#: OptShieldSet.cpp:443
msgid "按设备组"
msgstr "According to the device group"

#: OptShieldSet.cpp:446
msgid "单设备"
msgstr "Single device"

#: OptShieldSet.cpp:449
msgid "UNKOWN"
msgstr "UNKOWN"

#: OptShieldSet.cpp:507
msgid "屏蔽ID"
msgstr "Shield ID"

#: OptShieldSet.cpp:514
msgid "设置操作 "
msgstr "Set operation"

#: OptShieldSet.cpp:514
msgid "取消操作 "
msgstr "Cancel operation"

#: OptShieldSet.cpp:520 OptToken.cpp:563
msgid "注释:"
msgstr "Annotation:"

#: OptShieldSet.cpp:523
msgid "操作成功"
msgstr "Operation success"

#: OptShieldSet.cpp:523
msgid "操作失败"
msgstr "Operation failed"

#: OptTagSet.cpp:231
msgid "点标签操作成功"
msgstr "Point Tags operation success"

#: OptTagSet.cpp:626
msgid "限值设置成功"
msgstr "Set limit value successful"

#: OptTagSet.cpp:631
msgid "限值设置失败"
msgstr "Set limit value failed"

#: OptToken.cpp:21
msgid "挂牌检查错误"
msgstr "Error in listing inspection"

#: OptToken.cpp:36
msgid "设备挂"
msgstr "Device listed"

#: OptToken.cpp:420 OptToken.cpp:421
msgid "标志牌同步"
msgstr "Denoter synchronization"

#: OptToken.cpp:453
msgid "挂牌成功"
msgstr "Listing success"

#: OptToken.cpp:457
msgid "摘牌成功"
msgstr "Delisting success"

#: OptToken.cpp:461
msgid "改牌成功"
msgstr "Change the placard success"

#: OptToken.cpp:465
msgid "移牌成功"
msgstr "Move the placard success"

#: OptToken.cpp:497
msgid " 挂"
msgstr " Hang "

#: OptToken.cpp:502
msgid " 摘"
msgstr " Pick "

#: OptToken.cpp:507
msgid " 移动"
msgstr "Move"

#: OptToken.cpp:512
msgid " 修改"
msgstr "Modify"

#: OptToken.cpp:551
msgid "挂牌ID"
msgstr "Listing ID"

#: OptToken.cpp:595
msgid "成功"
msgstr "success"

#~ msgid " 用户组:"
#~ msgstr "User group:"

#~ msgid " 操作用户:"
#~ msgstr "Operation user:"

#~ msgid " 操作主机名:"
#~ msgstr "Operation hostname:"

#~ msgid "遥控操作失败：获得测点控制信息错误 !"
#~ msgstr ""
#~ "Remote control operation failed: error in obtaining control information!"